C
ContractorCalcPro
← Back to Guides

How Much Does a 24x24 Concrete Slab Cost in 2026?

Published by ContractorCalc Pro Technical Team • 6 min read

Typical Cost Summary

A standard 24x24 foot concrete slab (576 sq. ft.) costs between $3,450 and $5,200 for DIY materials, or $4,800 to $8,600 professionally installed.

That equals roughly $6.00 to $9.00 per square foot for basic pours, or $10.00 to $15.00 per square foot with thickened edges and pump truck service.

Volume Calculation for a 24x24 Foot Slab

A 24x24 garage pad poured at a standard 4-inch depth requires 7.11 cubic yards of concrete before waste margins. With a recommended 10% job-site buffer, order 7.8 to 8.0 cubic yards.

If pouring a 5-inch vehicular slab, volume increases to 8.89 cubic yards (9.8 yards with waste). That is roughly one full ready-mix delivery truck.

Itemized Material Cost Breakdown (DIY vs Contractor)

Expense Category Quantity / Specs Estimated Cost
Ready-Mix Concrete 8 Cubic Yards (3,500 PSI) $1,150 - $1,400
Gravel Base (#57 Stone) 4 inches depth (approx. 10 tons) $450 - $650
Steel Reinforcement #4 Rebar (1/2") in 18" grid + chairs $320 - $480
Lumber Formwork & Stakes 2x4 / 2x6 framing boards + duplex nails $180 - $260
Vapor Retarder (10 mil) Polyethylene roll + seam tape $90 - $140
Total DIY Material Cost Self-Performed Labor $2,190 - $2,930